craigmcgee Posted February 10, 2008 Report Share Posted February 10, 2008 This is my first scorpa and since i have had it i have been realy impressed with it, but... its been overheating a fare bit, local dealer gave me a new thermo which solved the problem, but now the fan is not working at all! any ideas? Quote Link to comment Share on other sites More sharing options...
andat Posted February 11, 2008 Report Share Posted February 11, 2008 Don't worry, the fan on my 07 SY250 hardly ever cuts-in...maybe I should worry??? Quote Link to comment Share on other sites More sharing options...
hoodie2 Posted February 11, 2008 Report Share Posted February 11, 2008 Have you removed the lights and any of the wiring harness? If so did you remove the regulator that clips onto the alloy sub frame? This affects the current to the fan and needs to be left on. Otherwise check the block conectors/wiring under the tank. It's pretty tight in there and I found one of the conectors had got pulled and was'nt tight. Good luck. Quote Link to comment Share on other sites More sharing options...
craigmcgee Posted February 11, 2008 Author Report Share Posted February 11, 2008 cheers, ill have a look and check i havent disconnected any wires or anything. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.