tony27 Posted April 19, 2009 Report Share Posted April 19, 2009 No.....Just do them as tight as possible by hand, I've never used torque figure as don't own 1 that goes that low, just an experience thing as far as feel. 72 foot/pounds is for crankshaft nut holding on gear. From memory flywheel is around same figure. Good luck Quote Link to comment Share on other sites More sharing options...
neo Posted April 29, 2009 Report Share Posted April 29, 2009 Just to finish this thread off (and test my photo bucket link) I just had to show you the 24mm OKO carb before I did the main bearings....YUK!!! Best of balance. Neo Quote Link to comment Share on other sites More sharing options...
trialsnutterman Posted April 29, 2009 Report Share Posted April 29, 2009 It's no wonder they had gone then! Quote Link to comment Share on other sites More sharing options...
ikb Posted May 5, 2009 Report Share Posted May 5, 2009 Ive got an 08 Beta with rusty mains!! I always run for a while after washing, obviously not long enough!!! I was wondering which 2 stroke oil you use? I have been using Ipone strawberry flavour stuff which is a tenuous link to Sherco as Ipone is the recomended oil for Shercos Ian Quote Link to comment Share on other sites More sharing options...
neo Posted May 6, 2009 Report Share Posted May 6, 2009 I just use Castrol TT fully synthetic ....and I didn't see any rust while I was in there. I have you tied riding your bike 4 times ad day Best of balance. Neo Quote Link to comment Share on other sites More sharing options...
copemech Posted May 7, 2009 Report Share Posted May 7, 2009 Ive got an 08 Beta with rusty mains!! I always run for a while after washing, obviously not long enough!!! I was wondering which 2 stroke oil you use? I have been using Ipone strawberry flavour stuff which is a tenuous link to Sherco as Ipone is the recomended oil for Shercos Ian Even a Beta is no submarine! I never run the bike after washing till the filter is removed and inspected. You can induce more water and dirt into the motor that way than it would ever get in a trial. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.