apkpro280 Posted July 31, 2009 Report Share Posted July 31, 2009 Help, need thread size for a broken bleeder valve on the rear brake.... Quote Link to comment Share on other sites More sharing options...
mecajental Posted July 31, 2009 Report Share Posted July 31, 2009 If your bike is a GasGas, the thread is 10 x 1.0 . You can see it on this link: http://www.ajpamerica.com/rebuild-kits-and-parts.html Saludos Quote Link to comment Share on other sites More sharing options...
peterb Posted August 1, 2009 Report Share Posted August 1, 2009 Hello APK, If you are talking about the rear caliper bleed nipple, this thread is M6 x 1.0 (6mm diameter, 1mm pitch) The pre PRO models have a larger nipple arrangement. If it has seized in place, be real careful when drilling out that you are precise in getting your 5mm tapping drill exactly in the centre, also you need to know how deep to go as the end of the nipple has a bevel surface that seats up against a similar bevel inside the caliper. Best to measure the new nipple first to gauge the drill depth so as not to cut past the origina bevel in the caliper. Bye, PeterB. Quote Link to comment Share on other sites More sharing options...
apkpro280 Posted August 3, 2009 Author Report Share Posted August 3, 2009 Mecajental and PeterB, thanks for all your help!! I`ll let you know how its goes !! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.