Jump to content

?wiring For Lights.


bodgit0_0
 Share

Recommended Posts

Decided to run my Beta Techno 1995 on the road for a while.

Have fitted a set of lights that have been bench tested to confirm they are good including the horn.

Tried stealing a feed from the power that goes to the electric fan.

Have found the voltage to be all over the place from 2 volts with my light loom connected, then 6 volt on the bike alone, and sometimes it will run at 12 volts.

The more that is on the lower the volts are??

I have the brown wire from the stator running up to a black box which then comes back out to a silver box that gets very hot.

Can anyone confirm how the bike should be wired, or away to sort a viable output that will feed both the fan and lighting loom.

I know I could run it on a day-time MOT but will be taking to work and the hours are all over the place.

Cheers for any advice offered

Lee

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...