gaz Posted December 27, 2009 Report Share Posted December 27, 2009 Hope you've had a happy christmas folks Just a quick one for an 08 rev 3. If the rear shock dampening screw is turned all the way out, so that is free from the shock body (by accident!), once put back in will it cause a performance problem? i.e. will the shock need re gassing? or is the screw just a cap head that actuates an internal valve? Quote Link to comment Share on other sites More sharing options...
copemech Posted December 28, 2009 Report Share Posted December 28, 2009 Best I recall, it is as you describe and simply does the inner workings. If you put it back in, you should be able to feel it contact the control valve. Quote Link to comment Share on other sites More sharing options...
rlracer Posted December 28, 2009 Report Share Posted December 28, 2009 I'll do my best to describe the adjustment screw. As you turn the screw in and out it moves a rod that goes down the center of shaft. The slot end that you turn has an o-ring on it as a seal that you cant see unless it is broken and you have the piece in your hand. If the screw comes completely out it's broke, and I have seen this. It you have turned the adjustment screw out till it lightly bottoms and you screw it bask in to see where it was at no problem you want lose anything. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.