Jump to content

125 To 80Cc Conversion?!


eugheugh
 Share

Recommended Posts

Just bought what appears to be a Gasser 125/160 water cooled barrel that looks like its been sleeved down to 80cc, that is, it's got a steel liner and a piston measuring 50mm across and a single dikes ring. Has anyone reading this heard of this conversion ?

Link to comment
Share on other sites

 

 
  • 2 weeks later...

Thanks lowbrow. For anyone mystified by this posting I can explain. I have been after a 160cc JTR barrel and head for some time and came across this modified barrel on eBay listed as having been modified with a steel liner-presumably because the original plated surface had worn. I have Identified the piston supplied as Yamaha YZ100 so whether this was a known modification or a one-off is unsure. It would be interesting to see if it actually works okay as a trials engine!!. Ports in barrel line up perfectly with the steel liner so whoever did the mod knew what they were doing!. I'm looking for a reed valve block and inlet stub if anyone can help?.

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...