Jump to content

Cutting Out


andybetarev3
 Share

Recommended Posts

 

 
 
 
 
 

just a few questions.

did you have to remove the water pump, or drain the coolant?

Did you have to remove the fuel tank to top up coolant.

Maybe you have dislodged a wire,or got coolant into electrics.

Maybe you trapped the fuel line when you put tank back on.

Did you start the bike with the tank off? Maybe got dirt in the fuel line or in to the carb.

Just a few Ideas!

when things like this happen after you have been working on the bike, its usually human error and not just coincidence!

TLTEL

Link to comment
Share on other sites

 

My bet is that he pulled the throttle cable out of the top of the carb. And it caught just around the lip of the adjuster that it must fit INTO, which is now holding the carb open by as much as 1/4th throttle possibly..

ANYTIME YOU work on a bike, before you start it, you GOT to be able to hear the carb's SLIDE hit bottom, it makes a distinct click when it hits the idle screw.

Edited by sting32
Link to comment
Share on other sites

 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...