mquatrello Posted March 13, 2013 Report Share Posted March 13, 2013 Hi , just wondering if a rear wheel off a rev3 can be fitted to an Evo? has anybody tried? Thanks all !! Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted March 14, 2013 Report Share Posted March 14, 2013 dont think it fits Quote Link to comment Share on other sites More sharing options...
nickytricks Posted March 14, 2013 Report Share Posted March 14, 2013 Hi. I converted my 07 Rev 3 wheel to fit my 2010 Evo. I think that Lampkins may do a conversion kit (they certainly did, but may not any more). All that was required was to machine new spacers to get the sprocket in the right place and then machine spacers for the disc to get that in the centre of the caliper. I can't remember the exact dimensions as I did the conversion about 2 years ago but I think I posted them on here so you may be able to search for them! It works fine and has been used in the SSDT (no greater test!) several times with no problems at all. Nick Quote Link to comment Share on other sites More sharing options...
mquatrello Posted March 14, 2013 Author Report Share Posted March 14, 2013 Hi thanks , I'll speak to Lampkins and see if they still have any. if its a case of new spacers i can always get some turned to suit. I'll borrow a wheel and have a play. Cheers!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.