Jump to content

Gas Gas Txt 50 Boy Ignition Problem


malcolm easson
 Share

Recommended Posts

I stripped my sons bike to replace a broken gear selector shaft. Prior to disassembly the engine ran fine. After rebuilding i cant get a spark at the plug. I tested the plug on another bike and its ok so it must be the ignition system. Does anybody have any idea what might be wrong. Does anybody have a copy of a wiring diagram for the 2005 model so i can check that i have fitted all the correct wires together.

thanks for any help.

Link to comment
Share on other sites

 

 
 

yeah, tried that but still no luck. Is ther only one earth terminal?

thanks

If it was running ok before the repair it will almost certainly be something that you have done, go through wiring again again.

Link to comment
Share on other sites

 

Try http://www.uk-motopl...om/contact.html

I know it says motoplat but he knows a fair bit about gasgas boys as well.

Can you post a photo of your stator.

Boys had a history of poor igntions and there are a number of variants fitted.

If it is the same as the earler selettra stators a poor earth is likely but also is a poor contact between the stator coil windings and the wires that come off them. some have a very poor design of wire joint and just moving it off and back onto the bike could have caused it to fail.

Edited by dadof2
Link to comment
Share on other sites

 
 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...