farmer58za Posted January 29, 2014 Report Share Posted January 29, 2014 (edited) Hi All Which way round does the points cam go on a 37A motor? The cam I have has a "1" stamped flat on the one end that could indicate the direction of rotation. The cam has a steep ramp and a much flatter ramp on the other side. When the cam is put in with the "1" on the outside face pointing forwards, the steep part of the ramp will be effective for the points closing. The Villiers manual is not much help, but I'm sure the solution is something that every Villiers owner (except me) knows. Thanks David Edited January 29, 2014 by farmer58za Quote Link to comment Share on other sites More sharing options...
trialsrfun Posted January 30, 2014 Report Share Posted January 30, 2014 Some of these cam's are arrowed for direction of rotation, I think the mark on yours is that arrow. The stepped part at the other end of the cam goes up to or over the lead thread on the crank. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.