Jump to content

Mitani Header Pipe


trials930
 Share

Recommended Posts

 

 

Some Mitani header pipes will just slide in the original silencer gasket collar without any issue, as the diameter of the pipe going into the silencer is the same as the original, but some (the later ones) have the weld for the sleeved down part too close the the end, going into the silencer, so you can either use a dremel to reduce the length of the gasket in the silencer, or buy a new one and cut it down.

Link to comment
Share on other sites

 

Thanks for the replies, but my pipe is 27mm all the way to the back edge, stock is about 23.4mm, I will need a 27mm I.d. gasket , as a tempory solution, I machined an aluminum sleeve 27.2 mm I.d. by 31.2 mm o.d. by 31 mm long, and sealed with high temp rtv, surely, Mitani must have made something to be able to mount their pipe to a stock midpipe. Thanks, Ken

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...