Jump to content

Sign in to follow this  
millerme

Bultaco Clutch Nut

Recommended Posts

hi guys

tried to change the main seal on the bully this eve ,used a air impact gun got the crank nut off but no luck on the clutch nut

seam to be on very tight any ideas would be gratefully appreciated on the removal

Share this post


Link to post
Share on other sites
 

 

The clutch hub is very difficult to hold, you will probably need to make/buy holding device probably Inmotion or E Bay,

you can sometimes hold the hub carefully with heavy gloves & using air impact get them loose.

A tool can be made from non eared clutch plate with a suitable handle welded welded to it.

Good Luck

Larry

Share this post


Link to post
Share on other sites
 
 

hi guys

just bought a clutch holding tool for inmotion it a Sammy miller type tool not the laser cut ones as I see on the net as they do bend a lot in use

  • Like 1

Share this post


Link to post
Share on other sites
 

That should help, I had to use a 3 ft long piece of scaffold tube over a wrench once to get one undone (my air wrench wouldn't touch it!!)

Share this post


Link to post
Share on other sites
 

Looks like millerme gets around smartly by looking at the post times!!!

Good show!

Larry

Share this post


Link to post
Share on other sites
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...