steve_earle Posted April 13, 2015 Report Share Posted April 13, 2015 Thought I'd get in 1st and title the topic before some one else says it!!! This section has been quiet for ages now so I thought I'd post a couple of pics of a project I should have done by now. I've been collecting loads of parts over the past year or so, I just need to get the rest of it mocked up and fabricated then strip back down and refurbish it all. I was lucky to get one of the last 2 new mudguards in existence, I'm not going to use it though, it's too rare so I'm getting replica's made as I know I'll end up breaking it. Spot the parts that shouldn't be on the bike. Quote Link to comment Share on other sites More sharing options...
baldilocks Posted April 14, 2015 Report Share Posted April 14, 2015 Swinging arm, rear wheel, rear brake,front forks front wheel for a start Quote Link to comment Share on other sites More sharing options...
paulc76 Posted April 14, 2015 Report Share Posted April 14, 2015 would be interested in a replica rear mudguard if you get some made cheers Paul Quote Link to comment Share on other sites More sharing options...
mark kremin Posted April 14, 2015 Report Share Posted April 14, 2015 I got a fibreglass replica rear mud guard for my jcm 240 tr from the man himself joel correy last year think it was £80 posted to me in the uk,he still has loads of spares easist way to contact him is by email Quote Link to comment Share on other sites More sharing options...
paulc76 Posted April 14, 2015 Report Share Posted April 14, 2015 cheers mark i will give him a try not desperate yet but its getting shorter and shorter Quote Link to comment Share on other sites More sharing options...
axulsuv Posted April 14, 2015 Report Share Posted April 14, 2015 Steve : forget the hoopala ... Just finish it and throw it at some muddy rock and roots !!!! and post a picture after ... Glenn 1 Quote Link to comment Share on other sites More sharing options...
steve_earle Posted April 15, 2015 Author Report Share Posted April 15, 2015 Swinging arm, rear wheel, rear brake,front forks front wheel for a start Rear wheel, brake and swingarm from a 99TXT, Rev 3 forks and yokes, Sherco front wheel. I've got to fabricate a mount for the rear linkage and tig'd on the swingarm. I need to find another shock as it has a weep so I will find something lighter and more modern and make it work with the old spring. I need to reinforce frame and change the rake and footpeg mounts. I'm planning to go original colors and stickers as I still want it to look JCM. So far it hasn't cost me much luckily as the bikes are worth next to nowt, I have a soft spot for the bike with many teenage memories to re-live on it! I just need to get welding and fibre glassing now. 1 Quote Link to comment Share on other sites More sharing options...
Rendell88 Posted December 3, 2020 Report Share Posted December 3, 2020 Did you ever finish the JCM?? And I'm looking for a rear mudguard for mine if you know where I can find one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.