Jump to content

Wheel Run-Out


monty_jon
 Share

Recommended Posts

 

In which direction?

To the side or on height?

A sidewise run out of 1mm is still Ok, while 3mm is too much.

A run out to height here also 1mm is OK, tires have already a run out of 1 - 2mm, a good workshop will mount the tire so that the run out of rim and tire will be compensated to each other.

Anyway as it is a trials bike I guess there are not so high standards as you can't ride very fast as with a road bike.

So a rum out of 2-3mm might still acceptable in both directions. I personal don't like it and gave the wheels of my old bikes to a professional "Radspannerei" that trued them, a small amount of bucks and as they too check the tension of the spokes worth to spend,(10 € per wheel). I gave them just the wheels and axles to save money.

  • Like 1
Link to comment
Share on other sites

 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...