Jump to content

Point Gap, Ty80


jas
 Share

Recommended Posts

 

 

15 to 18 thousandths of an inch or about 0.4mm. I don't think you can move the stator backplate on a TY 80 and therefore the timing (in addition to dwell angle) is fixed by points gap. Smaller gap retards timing, larger gap advances it. If you can find the specified advance / TDC then use a strobe to set this. I think TY 80 should be set between 1.8 and 2.3 BTDC.

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...