anthony121 Posted March 6, 2016 Report Share Posted March 6, 2016 I was hoping someone may have a few ideas with a problem I have on my TY175. I was out on it today and it wouldn't tickover at all . It made no difference turning the tickover screw right in or out. The tickover screw and mixture screw were both changed about 6 months ago and have been no problem.Thanks. Quote Link to comment Share on other sites More sharing options...
trialsrfun Posted March 6, 2016 Report Share Posted March 6, 2016 Check air filter before stripping the carb and blowing everthing through with an air line (do NOT poke anything through the jets) then check very carefully the O ring around the main jet holder which fits into the float bowl. Quote Link to comment Share on other sites More sharing options...
bobb Posted March 6, 2016 Report Share Posted March 6, 2016 bloked pilot jet ? 1 Quote Link to comment Share on other sites More sharing options...
anthony121 Posted March 7, 2016 Author Report Share Posted March 7, 2016 Thanks I'll strip the carb this week. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.