Jump to content

Air Caps


shakennstirred
 Share

Recommended Posts

 

 
 
 
 
 
 
 
Finally Got everything together.
One or two things different.
Yes the Cap fits, but you can no longer slide the fork leg out the top yoke, because its 37mm wide, So people will need to remove cap or file it down to 35mm.
Also the New valves are same thread and 14mm, but the part where the valve cap goes is shorter(pictures show that).
Only problem I found with that was checking the psi with my gauge, it lets the air out instead of reading it, as its not long enough to seat on the seal in the gauge.
At least its looks better now

 

post-22624-0-89556400-1463848859_thumb.jpg

post-22624-0-04582000-1463848871_thumb.jpg

post-22624-0-45548900-1463848882_thumb.jpg

post-22624-0-41816800-1463848893_thumb.jpg

Link to comment
Share on other sites

 
  • 2 weeks later...
 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...