gilles Posted June 17, 2016 Report Share Posted June 17, 2016 Hello, Anyone here has positive experience in recovering a LiPO batt with 1 defective cell? I read you have to charge it in NcCd function without the ballance connector. But I really have no tension at all in the dead cell. The dead cell is not swollen.... Shall I try or just recycle it.... Greets Quote Link to comment Share on other sites More sharing options...
gwhy Posted June 20, 2016 Report Share Posted June 20, 2016 i would be very careful trying to recover a lipo... first thing is what is the total voltage across the main discharge wires of the battery ? if its only 14.78 then You have a very poorly cell that ideally needs to be removed and replaced, but if the total voltage is at least 2.5v higher than 14.78 then its more than likely that you just have a bad balance tap wire and this would be the thing to check before trying anything . Quote Link to comment Share on other sites More sharing options...
crazybond700 Posted June 21, 2016 Report Share Posted June 21, 2016 Would indeed be very carefully. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.