Jump to content

Ajp Master Cyclinder


hamill_glen
 Share

Recommended Posts

 

Are they second hand mastercylinders? If they are you would benifit from a seal kit. The cup seal on the piston can swell up slightly covering the hole in the mastercylinder, if they are new try back bleeding from the caliper back to the resivor using a syringe!

Link to comment
Share on other sites

 
 
 

Have you still got fluid in the caliper and hose? If so just turn the bars so m cylinder is at highest point, make sure the hose isn't higher where it crosses the number board or headlight. Then slowly pump the lever and you should get bubbles coming out of the cylinder. It shouldnt take more than 5 mins. If you can't get pressure it must be leaking at the joint. I only ever use the bleed nipple when doing rear brake.

Link to comment
Share on other sites

 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...