ajc Posted August 19, 2016 Report Share Posted August 19, 2016 Hi I`ve just bought a 314r and am having problems with starting and running. I can get it started with the choke out and when I push the choke in to halfway the revs drop as normal. But then if I push the choke lever all then way in the revs increase massively until I push the choke lever back to halfway open and the revs then drop again. I have never had a two stroke or a trials bike before as I have always had four stroke road bikes. The choke lever is mounted on the handlebar. There does not seem to be any adjustment mechanism for the cable at either end. Any suggestions and help greatly appreciated Cheers Tony Quote Link to comment Share on other sites More sharing options...
baldilocks Posted August 19, 2016 Report Share Posted August 19, 2016 I'd start by cleaning the carb, it may just be blocked jets or a damaged hose 1 Quote Link to comment Share on other sites More sharing options...
craigrushton Posted August 20, 2016 Report Share Posted August 20, 2016 If not carb (as above) Crank seal i'm afraid. Exactly what happened to me ! Quote Link to comment Share on other sites More sharing options...
ajc Posted August 27, 2016 Author Report Share Posted August 27, 2016 Thanks guys I will start with a carb clean and hope it is that not the seals! Do you know where I can get parts such as fuel filter and throttle cable for this carb it is a dellorto PHBH26SD? Cheers Tony Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.