Jump to content

199 Small End Bearing


markg
 Share

Recommended Posts

Hi all,

Does anyone know if you can use the 30mm bearing instead of the 20mm one with the 2 alloy spacers?

I was supplied 30mm one with a new Mahle piston and wanted to check it was OK to use before I fit it.

Thanks.

Mark G

Link to comment
Share on other sites

 

 

Hi Mark. I have a 199 crank in having a new bigend put in it now. I bought an Italpart piston and a bigend kit from that well known English shop and the 30mm small end bearing does not use spacers on it and the bloke doing the work emailed me today and said the conrod really needed 1mm thrust washers on it instead of the .5mm ones supplied. So the answer is yes. Graham.

  • Like 1
Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...