Jump to content

ossa mar clutch


deputy dawg
 Share

Recommended Posts

can someone tell me if i have a bit missing on my clutch please, having put the actuating arm in the ignition side cover,bolted the cam on the bottom of it, it doesn't come into contact with the clutch push rod.      perils of buying a bike in a box i guess

Many thanks

Link to comment
Share on other sites

 

Might sound daft but make sure you have the cam on the right way around, should be evident from the contact marks - also make sure it isn't bent or mis-shapen (unlikely)

Or:

A ball bearing sits between the two pushrods - sounds like it's missing

With the timing cover off, pull out the pushrod, then prise out the pushrod seal as there is a gap behind the seal that the ball bearing may have previously fallen into if someone has tried to feed it in with the seal in place. If you feed the ball bearing in from that side you need the seal out to ensure it has actually gone into the pushrod housing.  Worth a look before you search for another to fit if it is missing

Link to comment
Share on other sites

 
 
 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...