Jump to content

TY175 Clutch Lever extension?


ekbeanctr
 Share

Recommended Posts

 

 
 
 
 

I made an extension for my 250 ( not off the shelf ) a few years back, and I did not felt such a difference, even if I oiled the cable until I followed JonV8 advise. I replace the cable with a new Venhill and oiled it with WD40 every ride. At our last TS meeting a few friend tried the clutch and the general comment was it's almost as light as a modern bike clutch.

Guy

  • Like 3
Link to comment
Share on other sites

 
  • 3 months later...

I put an extension lever on my ty175 from tyoffroad. It's a noticeable improvement. Using a kitchen scale to measure the actuation force, it lightened the pull by about 15 percent. The pressure required to push the clutch lever fully open went from about 7lbs to 6lbs.

Edited by hdscarbro
Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...