Jump to content

Air box lid fit - fixed, for now!!!


steve
 Share

Recommended Posts

Hi all, 

I recently bought a used TRS 250 RR and so far I've been delighted with the bike. I went through the rear end greasing linkage and swinging arm and was very pleased with how easy it is to work on.

My only minor gripe I found was the airbox lid didn't fit very well. I remember seeing the bike once with the previous owner and noted he was using a ring of pre cut clear vinyl to cover the gap. The problem seemed to be the sides of the lid were lifting up, i.e the lid had flattened. 

Having fitted a clean air filter I didn't fit the lid immediately, instead I put the lid in the vice and gently squeezed it closed a little and left it a week. Today I removed the lid and was delighted to find it now fits perfectly. 

I did a little search and didn't see anything else posted about this, apologies if it's already been discussed to death!

Link to comment
Share on other sites

 

 
 
  • 1 month later...
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...