Jump to content

K-Scan for Ossa


Dix
 Share

Recommended Posts

4 hours ago, daveraw70s said:

Hi Lotus. Can you direct me also to K scan? daveraweng@hotmail.com

Out of interest, where are you located ? 

Dave

 

Hello

I sent link also- but then I saw you perhaps already have everything.

 

I’m in the Northwest Corner of Washington State- USA (right across from Victoria, BC Canada)

Link to comment
Share on other sites

 

 

The software was freely shared by OSSA even when they were still active.

     (The owner says they are making e-bikes now, would Iike to start motorcycles again.  But I’ll believe that when I see it).

  • Like 1
Link to comment
Share on other sites

 
  • 2 weeks later...
 

I've add you to the share folder

okapal@outlook.com

 

Good luck! On Windows 10 there is no problem on software from my side. But I'm not able to have it work reading ECU serial and also I'm not able to have the ECU remap software work. Both are not capable to read ECU information! All the to other function work great .

 

 

Link to comment
Share on other sites

 
  • 3 months later...
 
 
  • 3 weeks later...

Hey guys,

I´m new in the Forum and like it a lot!
Nowhere else I did find as much inforamations for ossa like here.

I´m going with a Ossa 280i 2012 and am interested in sensordata and therefor I´d need the K-Scan..

It seems that I can´t send private massage...

Could anyone send my a link or software?!
You´d make a really happy chap out of me^^

 

best from Loweraustria

Patric

Link to comment
Share on other sites

 
 
 
  • 3 weeks later...

Hi everyone, I also have the same problem.
I managed to recover a connection cable used, but I don't have the software ?

In my Ossa 300 a too quiet mapping has been planned and I would like to modify it with something worse.

If you can turn it over to me I would be very happy

bernardi.simone@live.it

Thanks

Link to comment
Share on other sites

 
 

As a note, the 300 Factory I owned was VERY aggressive. I used the ‘slow’ map switch position, changed to slow throttle and installed one tooth larger countershaft sprocket to tame it down for my ‘intermediate’ skills.

I am not sure how much difference between the factory and standard 300 models.

Link to comment
Share on other sites

 
14 hours ago, Simonelongus said:

Hi everyone, I also have the same problem.
I managed to recover a connection cable used, but I don't have the software ?

In my Ossa 300 a too quiet mapping has been planned and I would like to modify it with something worse.

If you can turn it over to me I would be very happy

bernardi.simone@live.it

Thanks

Check your emails.

Link to comment
Share on other sites

 
On 12/2/2019 at 10:22 AM, Simonelongus said:

Hi everyone, I also have the same problem.
I managed to recover a connection cable used, but I don't have the software ?

In my Ossa 300 a too quiet mapping has been planned and I would like to modify it with something worse.

If you can turn it over to me I would be very happy

bernardi.simone@live.it

Thanks

This is rude, he wrote me in the chat insulting me because I didn't reply within 24 hours by sending him the software. he is a poor, rude Italian, don't pay attention, we are not all like that;)

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...