Jump to content

349 Clutch Basket Rebuild


motosolex
 Share

Recommended Posts

Hi Fellows. 

Our 349 has a clutch in need of attention and need to check the plates' condition etc. 

First concern is on how to remove the 3 or 4 retaining clips on the outside of the plates without damaging them? And is this preventing the removal of the gear section on rear of basket?

Next it  seems very difficult to press the plates enough to be able to remove the pins.

Any pointers or advice would be greatly appreciated.

Lastly, what are the wear tolerances on the plates and signs of excess wear. 

Thank you.

Here is a picture of the basket and note the little retainer clip.

 

IMG_1648.PNG

Link to comment
Share on other sites

 

 
14 hours ago, kingscorpion said:

Here you can find a simple tool to remove the pins: Después de mucho tiempo callado, una cosita rápida: herramienta para desmontar embragues Montesa

After disasembling the plates, remove the wear scratches in the basket using an abrasive file.

Great tool fabrication. Thank you. 

If I understand correctly one must remove first the small Friction Disk Spring retainer clips  prior to compressing the plate enough to pull out the pins? 

Gracias!

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...