Jump to content

wrecking yard rescue1974 RL 250 Exacta


Mark Ripley
 Share

Recommended Posts

Hi everyone I'm new to the site and I just rescued a 1974 RL 250 from a old motorcycle wrecking yard here in Washington state.  A little back story the very first dirt bike I bought from  a dealer ship was a 1974 RL 250 Exacta  that the owner of the Suzuki dealership turned it into a enduro for enduro racing the things he changed were the Tank to a TM tank and put a TM seat on it and he also Put Knobby tires instead of the trials tires. It was a great bike i could do anything and go anywhere on that bike I will try to up load some photos of my old RL 250. anyway back to the wrecking yard rescue I happened into this wrecking yard looking for parts for my buddy that is building a drag bike out of IT 490  and I seen this RL sitting there so I inquired about it and he wanted $400 for it so my mind said how about I trade you a 1977 Hodaka 250 for the RL and to my amazement he said yes so I now own this bike and I am trying to restore it, it was missing a few items and the motor was stuck I know it will never be what it was when it was new but I figured I could duplicate the bike I had when I was 17 and let my grandson ride a real bike before he gets on a new bike I had a lot of great memory's on that RL 250 and now that Im 59 maybe riding it will make me feel like Im 17 again LOL . any way I will post update of restoring this great Bike. the first photo is me On my First RL 250 in 1975 the other five is the bike in the wrecking yard and the tear down for restoration of the Wrecking yard bike.  

RL 250 .jpeg

IMG_5389_(1).jpg

IMG_5438.jpg

IMG_5439.jpg

IMG_5441.jpg

IMG_5460.jpg

  • Like 5
Link to comment
Share on other sites

 

 

Thanks yes it will be a bit of work but its going to be so worth it .and the memory's I all ready have from my first RL have been so worth it even if I never ride it which I will be riding this I have almost all the parts just waiting for the bearings for the transmission and crank then I can put the motor together. and start on the frame then bolt it back together.  

  • Like 1
Link to comment
Share on other sites

 
 
  • 2 weeks later...

Mark, make sure the tiny passage (under the cylinder) that allows premix to lube the back side of the crank bearing is open. It may look open but you have to run a wire through it. The two RLs I have rebuilt both were completely blocked causing the crank bearing on that side to wear much faster than the one running off the transmission oil. These are great projects!!! Best of luck

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...