Jump to content

2016 Sherco 125 solid clutch


hectorwilson
 Share

Recommended Posts

I have a 2016 Sherco 125 and the clutch is rock solid, it’s impossible to pull it in. I have bled the system and replaced the hydraulic fluid, I have tightened the clutch basket nut and I have replaced the master cylinder and still I have the problem, any help would be greatly appreciated 

Link to comment
Share on other sites

 

 
 

Grab the clutch lever and open the bleeder on the engine case. If fluid comes out and the lever compresses the master cylinder and hose are good and you have a mechanical problem in the clutch assembly/slave cylinder. This is usually a problem caused by incorrect assembly of the clutch and/or actuation mechanism. 

http://www.sherco.com/tl_files/core/pdf/spare_parts/WEB-Spare_parts_FACTORY_2016.pdf

Edited by dan williams
Link to comment
Share on other sites

 
 
 
20 hours ago, Rapidroy said:

rubber tube from crank casing to swingarm

what happen was the pressure had build up making the clutch lever hard

 

if you leave the bike stopped  for 10 minutes  does the clutch level work ?

 

no, i sat it overnight and the clutch was the same the next morning, i cleaned the breather hose and sucked all the gunk out of the port, still solid

 

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...