Jump to content

Aly Gear changer for SWM


David Skinner
 Share

Recommended Posts

 

 
 
 
 
  • 3 weeks later...
On 13/08/2018 at 8:24 PM, b40rt said:

240 fantic I'm told. 

I just tried my Fantic 300 alloy gear lever with a folding tip on my Jumbo and unfortunately it doesn't fit, pity because the bend and length look spot on for a SWM. The Jumbo shaft is 13.5 mm and looks to have a finer spline than the Fantic, also the Fantic shaft measured closer to 13 mm.

I'm pretty sure Fantic 240 and 300 gear levers are the same, but I could be wrong ? 

Link to comment
Share on other sites

 
51 minutes ago, fourex said:

I just tried my Fantic 300 alloy gear lever with a folding tip on my Jumbo and unfortunately it doesn't fit, pity because the bend and length look spot on for a SWM. The Jumbo shaft is 13.5 mm and looks to have a finer spline than the Fantic, also the Fantic shaft measured closer to 13 mm.

I'm pretty sure Fantic 240 and 300 gear levers are the same, but I could be wrong ? 

Is the jumbo shaft the same as earlier 240 / 280's ? Never tried it myself, but the person who mentioned it works extensively on tl's and tx300's.

Link to comment
Share on other sites

 
1 hour ago, b40rt said:

Is the jumbo shaft the same as earlier 240 / 280's ? Never tried it myself, but the person who mentioned it works extensively on tl's and tx300's.

Good point b40rt, I don't know that much about these Rotax engines, the 350 TL Jumbo motor is different to the 240/280/320 TL's due to the different induction obviously but I don't know how much they vary elsewhere.

So, this starts a hi-jack of David Skinner's post/thread. 

Does anyone know of a replacement gear lever for a Jumbo with a swivel tip preferably in alloy also, and does anyone know of a suitable rear brake pedal replacement, metal is ok as I could graft/weld one of those swivel tips on to it. Cheers. 

 

  • Thanks 1
Link to comment
Share on other sites

 
 
 
 

Wow, there was a secret drawer full of rotax gear shafts! They appear to be the same between 350 & 240/280 motors. 13.6mm 31 spline. All the climbers I've owned & seen had a steel gear lever, I've never seen an alloy one, even on bosis & ahvala's bikes.

Edited by tshock250
  • Thanks 1
Link to comment
Share on other sites

 
  • 1 month later...
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...