Jump to content

Fancy Kick Starter Lever


herman
 Share

Recommended Posts

 

Hullo Herman , I am not sure if anyone makes them specifically, but a person with good metalworking skills should be able to adapt something from another make. The left side placement of the starter pedal does limit one somewhat, but I remember my Suzuki Super Six I had way back was like that, a good place to start ? Some Italian bikes from the same era were also left side starters. I expect the splines from a Bultaco lever would need to be used. A matter of lining up the 2 levers then seeing what the options are.  A few years back I made up one for an Ariel 500 single. We used a much later Suzuki lever and swivel with the Ariel splined piece, a solid pin in the middle then Mig welded to finish. Works well and is still in use today. So I say it is do-able with the right parts plus some help of a capable person to stitch it all together properly. Hope this helps, John.

 

Link to comment
Share on other sites

 
 
 
 
 
 
 
 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...