mbeers6 Posted September 15, 2018 Report Share Posted September 15, 2018 Wasn't paying attention and when reassembling, I put the rebound cartridge in the compression fork leg (i.e. the side with the brake caliper). Will this matter? I don't think it will since each fork will still do its job of compression and rebound. This is the 40mm aluminum Marzocchi forks (2010 250 Pro). I just put in new fork seals, bled the rebound cartridge and measured the air gap. I really don't want to take it all apart again just to put the rebound cartridge in the other fork leg. Thanks in advance!! Quote Link to comment Share on other sites More sharing options...
2stroke4stroke Posted September 15, 2018 Report Share Posted September 15, 2018 As your forks won't know left from right they will probably respond to all three of Newton's laws of motion as before, all else being equal. Quote Link to comment Share on other sites More sharing options...
mbeers6 Posted September 15, 2018 Author Report Share Posted September 15, 2018 Cheers, figured I was okay especially since the marzocchi's have springs in both legs. Thank you! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.