Jump to content

300 rr remapping


Rapidroy
 Share

Recommended Posts

I have successfully remapped  many 4rts 250, 260 various yrs

tried with my kit to read data from the 300 rr without success   05 and 07 software

twin throttle body  nn4 ic27      16400-nn4-m71

can anyone advise

 

Cheers in advance 

Link to comment
Share on other sites

 

 
 

If you check press release / sales blurb for the 2017 it did say PTB.

Having to send it back to Japan is a bit of a loose definition of PTB??

As said I wouldn’t want to change mine ?

Link to comment
Share on other sites

 

The rider of the Montesa 300 rr previously owned 300 Gasgas with all the mods, TRS 300, moving to the 300 rr  and the different way it makes  power

I agreed that the 300 RR is the best Montesa to date

Looks like he will need to work with what has, I would doubt that any off the shelf product would help

Disappointed that the PTB isn't

remapping can give an extra boost in areas that customer deems lacking   

 

Link to comment
Share on other sites

 
 
 

I have a 2017 300rr that was remapped by Inch Perfect Trials, who did an excellent job of just altering one of the two switchable maps to smooth out and prevent the bike stalling at lower revs. It also enabled the bike to go back to standard gearing and ride slow stuff smoothly. 

Link to comment
Share on other sites

 
 

I recently bought a 2016 260 model. Can anyone tell me where the red Service Check Connector is physically located?

The programming software is quite inexpensive at around $31 USD, whereas the interface hardware costs $414 USD.  I have a guess as to what the hardware does and would like to experiment with building my own.

TIA.

Edited by konrad
Link to comment
Share on other sites

 

It in the big rubber boot under the Throttle body - above the gearbox sprockets  -needs a bit of fishing out among  the other plugs.

You will need to confirm the 260 2106 has  a PTB 

  • Thanks 1
Link to comment
Share on other sites

 
49 minutes ago, jimmyl said:

You will need to confirm the 260 2106 has  a PTB 

Mine says 16400-NN4-J11 (same as 2017 but different from 2015 according to the parts books) and supports dual maps.   Is that user programmable?

Edited by konrad
Link to comment
Share on other sites

 
 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...