Jump to content

no clutch


vectradam
 Share

Recommended Posts

hi

 

my 2018 trs 280 has no clutch. there is only a little fluid in the master cylinder. I assume the seals must have gone in the slave cylinder.  Is this an easy job or could it be something else ?

 

many thanks

Link to comment
Share on other sites

 

 

You just need to remove the clutch inspection cover not the full clutch case so the water pump stays in place.

I think the seals are just o rings, easy to fit, be careful not to drop the washer and thrust bearing that are on the underside of the case and sit on the slave cylinder.

Remember it's mineral oil not dot4

You can see all of the parts if you look at the parts diagram on TRS UK site

Edited by baldilocks
Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...