viva 1 Report post Posted July 24, 2019 Hi guys new here but been riding cotas since 1975 i have a cota 247 mk2 1975 and insidw the outer cover on the gear change side is an elliptical adjuster but i dont know how its supposed to be set can anyone help please much appreciated in advance Quote Share this post Link to post Share on other sites
kingscorpion Report post Posted July 24, 2019 If it had a fixed position, it wouldn't need to have an elliptical screw. You have to find the proper position for you gearbox. In fact, there's no need to dissasemble the selector when you open the cases, but if you did it so, you'll have to make some tests with several positions until you find every gear is properly engaged when shifting upwards and downwards. Quote Share this post Link to post Share on other sites
lineaway Report post Posted July 24, 2019 I cannot get a close enough view. Are you sure there is not a centering mark on both the cam and lever. Seems thier was on my 200. Quote Share this post Link to post Share on other sites
lineaway Report post Posted July 24, 2019 Maybe follow these old threads. Quote Share this post Link to post Share on other sites
viva 1 Report post Posted July 25, 2019 Thanks guys your help was much appreciated Quote Share this post Link to post Share on other sites
brownie001 Report post Posted July 31, 2019 Hi, see the pdf I attached. Have fun, Phil Adjuster001.pdf Quote Share this post Link to post Share on other sites
viva 1 Report post Posted July 31, 2019 many thanks thats much appreciated nice book shame its not all in pdf? Quote Share this post Link to post Share on other sites
brownie001 Report post Posted August 2, 2019 You could probably get yourself a used book, there are some available. Use www.bookfinder.com Author is Clymer Titel is Montesa Service Quote Share this post Link to post Share on other sites
.thumb.jpg.027556f3d799bd3fcb36034ec117305a.jpg)