Jump to content

2013 gasgas txt pro ,clutcch not disengaging


tugg
 Share

Recommended Posts

Hi I have acquired a 2013 gasgas 250 and the clutch is not disengaging , I have bled the system and it is still the same , I decided to take the cover off and take a look and couldn't see anything obvious , I I un done the basket but couldn't undo the pressure plates because of the odd size bolts , anyone have any ideas what it could be ,also what size socket or tool fits the pressure plate bolts. cheers 

Link to comment
Share on other sites

 

 
 

Is not disengaging at all,or dragging?Does the fluid level drop,if so I would look at the slave cylinder,if not I would do as Nigel says and check the clutch pack thickness,should be 9.85 mm. 

Link to comment
Share on other sites

 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...