Jump to content

GAS GAS / TRS ENGINES


vectradam
 Share

Recommended Posts

 

 
 
 
 

Huski

22 hours ago, huski said:

Top end is the same but that's all 

That is not true Huski. The cylinders are not the same, the cylinder heads are not the same. The base gaskets are not the same, Only some of the pistons and little end bearings are interchangeable.

The friction plates in the clutch are the same dimensions, but the steels are not. Very very few parts the same in both motors.

  • Like 4
Link to comment
Share on other sites

 
On ‎8‎/‎11‎/‎2019 at 10:32 PM, arnoux said:

Huski

That is not true Huski. The cylinders are not the same, the cylinder heads are not the same. The base gaskets are not the same, Only some of the pistons and little end bearings are interchangeable.

The friction plates in the clutch are the same dimensions, but the steels are not. Very very few parts the same in both motors.

That's interesting information. So for the sake of conjecture if I wanted to renew the clutch on my TRS Gold I could order the Kevlar plates the new gasgas use theoretically?

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...