Jump to content

Gasgas 2011 250 power delivery like an on/off switch.


jockster
 Share

Recommended Posts

21 hours ago, nigel dabster said:

jetting wont make it snappy.

I think what happens is if the low throttle settings are off (pilot,mixture screw,slide) then once it comes up onto the properly set midrange(needle,needle position,spray nozzle) it can snap to attention rather quickly.

Link to comment
Share on other sites

 

On 1/13/2020 at 10:50 AM, htrdoug said:

I think what happens is if the low throttle settings are off (pilot,mixture screw,slide) then once it comes up onto the properly set midrange(needle,needle position,spray nozzle) it can snap to attention rather quickly.

yes id call that strong mid range and poor running up to 1/4 throttle. (not snappy and most 250s jetting will be close anyway?)

Link to comment
Share on other sites

 
On 1/13/2020 at 7:32 AM, nzpeterb said:

You note your bike is on standard gearing of 10/41.

In New Zealand our Gas Gas was supplied with 11/42.

The taller gearing may smooth the response.

Also make sure you have a slow throttle fitted. 

If a Domino throttle is fitted this would be a black tube under the grip.

A slow throttle has full travel over around one third of a turn, while the fast throttle movement is the same throttle opening over a quarter of a turn.

Hope this helps.

Regards,

Peter.


 

avoid slow throttle

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...