snorky29 Posted January 15, 2020 Report Share Posted January 15, 2020 Hi, my bike is a 2015 T2 300cc Evo, it runs the 12v halogen light on the front .....i would like to change this to an LED lamp ...my question is i see on the wiring diagram that there is a regulator in the wiring system is this just a voltage regulator rather than a regulator / rectifier as the voltage to the bulb is AC ...not ....DC so is my issue either the regulator is just controlling rough AC power from the stator and i need to fit a rectifier to convert to DC or is my regulator faulty any ideas please Neil Quote Link to comment Share on other sites More sharing options...
faussy Posted January 15, 2020 Report Share Posted January 15, 2020 (edited) Not clued up on beta electronics but most likely your lights are fed with AC, and the regulator/rectifier generates DC for your fan Edited January 15, 2020 by faussy 1 Quote Link to comment Share on other sites More sharing options...
snorky29 Posted January 15, 2020 Author Report Share Posted January 15, 2020 thanks for the reply....i will put a full wave rectifier on and see neil Quote Link to comment Share on other sites More sharing options...
snorky29 Posted January 16, 2020 Author Report Share Posted January 16, 2020 UPDATE: full wave rectifier worked great 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.