Jump to content

Vertigo start 12v battery installation


jeong won lee
 Share

Recommended Posts

hi....

I'm jeong won living in South Korea.

Vertigo 12v start battery connection is inconvenient
So I made a 12v portable starter battery with 18650 batteries.
It is 11.1v by connecting three 3.7v batteries, but 12v comes out because it is 4 volts when fully charged.
In the photo, the battery hold is on the side but is actually under the air filter.
Make a switch and start the engine When started, disconnect the switch.
If the switch is connected and kickstarter 3 starts.
 

 

20200219_170444.jpg

20200219_170446.jpg

20200219_170450_HDR.jpg

Edited by jeong won lee
Link to comment
Share on other sites

 

 
 
12 hours ago, misscrabstick said:

Designing a trials bike that needs a battery to start plus all the hassle of that just seems utterly mad to me.

The idea of an external power source for easy start is very good.
But it's a bit uncomfortable.
So I made a small 12v and a switch.
It is very easy start after installation and is comfortable.
My ideas I'm writing to share.
 
Link to comment
Share on other sites

 
  • 3 years later...
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...