Jump to content

climber 280 workshop manual


brad-climber
 Share

Recommended Posts

 

 

hi, thanks very much for the link, my problem is i fell of the bike and it went down on its side ( the rear brake side) picked the bike up  and the shaft on which the gear lever sits is leaking oil out of it, the shaft had a small amount of  in and out play before this happened but was fine and not leaking, i was wondering has the shaft pulled past an oil seal or has a clip jumped off, I'm hoping i don't have to split the nines just for this 

Link to comment
Share on other sites

 
2 hours ago, brad-climber said:

hi, thanks very much for the link, my problem is i fell of the bike and it went down on its side ( the rear brake side) picked the bike up  and the shaft on which the gear lever sits is leaking oil out of it, the shaft had a small amount of  in and out play before this happened but was fine and not leaking, i was wondering has the shaft pulled past an oil seal or has a clip jumped off, I'm hoping i don't have to split the nines just for this 

You can replace the outer seal and o ring easily, think they are all the same but best to check   https://www.motoswm.co.uk/shop/swm-rotax-kickstart-clutch-cover-oil-seal-kit/

There is another o ring on the other end of the shaft, which requires casings to be split to replace.

Link to comment
Share on other sites

 
 

If they have once got "oval" in shape which can also easely done by overthighten the kick starter screw the outer shaft is toast in terms of oil tightness or always will be incontinent.

 

It is difficult now to source NOS replacements. 

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...