Jump to content

Gas gas 250 txt


Craig hig
 Share

Recommended Posts

Hi all I’ve tried to kick start my gas gas txt 250 this morning and heard a crack from inside the casing the the kick start stayed down and didn’t spring back up the now the spindle connected to the kick start spins freely any advice would be appreciated thanks.

Link to comment
Share on other sites

 

 
 
 

Yup, it's time to open it up. Do be aware that for an initial inspection you can keep the coolant system intact (i.e., you can remove the water pump and clutch cover as a unit without first draining the coolant), and if you lay your bike on it's left side you can remove the clutch cover without first draining the oil. Jim Snell has a video on servicing the PRO clutch and it discusses these simplifications (as well as talks about a shim on the kick-starter shaft). It's all good stuff.

Edited by d2w
  • Like 2
Link to comment
Share on other sites

 
 
  • 2 weeks later...
 
 
 
 
 
 
 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...