Jump to content

bambam_n_chunx

2017 txt 250 carb

Recommended Posts

My new to me 2017 gasser carb looks like someone had been messing with it. Tried searching google for correct settings and set floats according to splat shop website.

Does anyone have the factory settings for a keihin pwk 28 gasser 250 carb?

Mines 45 pilot, 125 main, 3.5 slide and jjh needle on middle clip (was on 2nd) mix screw 2 turns out.

Thanks

Share this post


Link to post
Share on other sites
 

You just need to go to the Gas Gas trials web site and you can download the manuals. It's all there.

Art

Share this post


Link to post
Share on other sites
 

I posted a similar request for info back on 15th June 2019 relating to my Gasgas 250GP that has the same carb.

Go into Forums and search ‘Gasgas 250GP carb settings’ and it is on about page 6 of the search or trawl back to June 15.

My bike works beautifully now, good luck.

Share this post


Link to post
Share on other sites
 

The above search advice does not work !

Search for ‘250gp’ in the forums section and it will take you straight there, second item listed

Cheers

Share this post


Link to post
Share on other sites
 

Thanks

Read your post and tbh it looks like it was set up right apart from the float height which in my opinion was too high. Ive set the needle clip in the middle but am i right in saying the air screw is only 1 turn out on yours?

Out on fri so will see if its made a difference 

 

Share this post


Link to post
Share on other sites
 

1 turn out to max of 2 turns out, over 2 or under 1 turn out the idle jet should be changed.

Art  

Share this post


Link to post
Share on other sites
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...