mjwilson Report post Posted June 6, 2020 What's the best replacement carb for the Amal on a 349? Quote Share this post Link to post Share on other sites
barnesy Report post Posted June 6, 2020 I put on oko 26mm on my 348 runs and starts very well now. 1 Quote Share this post Link to post Share on other sites
mjwilson Report post Posted June 6, 2020 Thanks Barnesy, What's jets are in the OKO? There are a few for sale on EBay but not sure about the jetting. Mark. Quote Share this post Link to post Share on other sites
djr Report post Posted June 6, 2020 Mikuni, Dellorto, OKO , in fact probably anything would last longer than an Amal If possible buy from someone who can advise regarding size & jetting etc. 1 Quote Share this post Link to post Share on other sites
geoff850 Report post Posted June 6, 2020 Don't buy an OKO off Ebay they are fakes, contact Mid Atlantic Trials in USA they have done loads and may well have done a 348 and know what jets work they are very helpful, cost about £120 with spare jets and very easy to set up and work really well. The main jet size on an OKO does not correlate directly and is usually a bit bigger if you run a 100 main now you may need a 120 but the people at Mid Atlantic will explain all. Geoff 3 1 Quote Share this post Link to post Share on other sites
mjwilson Report post Posted June 6, 2020 Thanks Geoff. Quote Share this post Link to post Share on other sites
barnesy Report post Posted June 7, 2020 I'll have a look this afternoon and get back to you with the jet sizes, I bought mine second hand off a fella who had it on a 349 and its the best money I've spent on the bike.. Would recommend Mid Atlantic trials if I was after a new one. Quote Share this post Link to post Share on other sites
bigshineybike Report post Posted June 7, 2020 Useful to check where the petrol feed is. I fitted a mikini, the pipe was on the wrong side. And too high up .There's not a lot of space I had troubles getting the petrol into the bowl Quote Share this post Link to post Share on other sites
thai-ty Report post Posted June 24, 2020 On 6/7/2020 at 1:16 AM, djr said: Mikuni, Dellorto, OKO , in fact probably anything would last longer than an Amal If possible buy from someone who can advise regarding size & jetting etc. I would agree up until Amal introduced the Premier range of their Concentrics several years ago. More expensive, but........ superb build and component quality, a removeable pilot jet and a hard anodized slide. Really nice bits of kit. Quote Share this post Link to post Share on other sites