Jump to content

anthonysawrey

2001 Sherco 2.5 kickback

Recommended Posts

Hi all. Here is a question for those knowledgeable in the ways of 2.5 Shercos.

When I go start it I get a kickback. It may happen once or twice but bike still fires after that.

In my experience the only time I ever got a kick back like this was with a PE250 and in that case it was sheared flywheel key and it wouldn't go until that was fixed.

In this case bike starts after a couple of kicks.

Any ideas? Familiar phenomena?

Edited by anthonysawrey
tech clarification

Share this post


Link to post
Share on other sites
 

 

some of the older Sherco engines do have a tendency to kick back...I never investigated it but I think it's a lot to do with the kick start gearing which is quite fast and the short length start lever plus the lever is set higher from the ground, so when it does kick back you really feel it..I could be dreaming though

  • Like 1

Share this post


Link to post
Share on other sites
 
 

Thanks for your responses. I have a look at these suggestions and post again when I've done it..

Cheers

Share this post


Link to post
Share on other sites
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...