Jump to content

2008 Sherco 125cc trails cluch problems


Geordie250
 Share

Recommended Posts

Hi there I just bought my son a 2008 Sherco 125cc trails, there seems to be a problem with the cluch?

When pulling in the lever put the bike into 1st gear on letting out the cluch there's nothing then it stalls?

I'm new to all this so please no silly answers 

Thanks in advance

Link to comment
Share on other sites

 

The plates are stuck together. Try rocking it back and fourth in an upper gear before you start it. If you have plenty of room, just ride it around with the clutch in for a few minutes and it usually frees itself 

Link to comment
Share on other sites

 
 
On 7/21/2020 at 11:26 PM, Geordie250 said:

Hi there I just bought my son a 2008 Sherco 125cc trails, there seems to be a problem with the cluch?

When pulling in the lever put the bike into 1st gear on letting out the cluch there's nothing then it stalls?

I'm new to all this so please no silly answers 

Thanks in advance

Does this happen only when it's started from cold, or is it all the time?

Link to comment
Share on other sites

 

We only got it ive been told to drain out the gear oil and put in diesel drive it for about 10 min changing and sliping tha gears then drain it and put fresh gear oil back in not sure if this is right? What gear oil is used and how much?

 

Cheers 

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...