Jump to content

Sign in to follow this  
hgas

Weight removal from gear

Recommended Posts

Hi every one I know this has been covered a few times but I haven’t been able to find a step by step guide on how to actually remove the additional weight that’s pressed onto the gear on an evo ?I’m going to remove the flywheel weight aswell (Covid boredom+intrigue) I believe that a puller is needed for the gear side aswell to remove it ? Any tips or tricks would be greatly appreciated 

Share this post


Link to post
Share on other sites
 

Try removing the flywheel weight first to see if you like it with less flywheel. Easier to do one step at a time.

  • Like 1

Share this post


Link to post
Share on other sites
 

If the Evo motor is the same as the Rev 3, then the LHS weight is on a tapered shaft so you will need to fabricate a puller for that, I have the hole centres for the Rev 3 if you'd like this info. Bye, Peter B.

Share this post


Link to post
Share on other sites
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...