Jump to content

OSSA 280 head ‘O’ rings


lotus54
 Share

Recommended Posts

I’m working on a 2014 280 (Explorer)-  inner O-ring is bad so I need new ones.

  The ones I got are too large.  I think they are 82 mm and 104mm (have to measure diameter).  Does anyone know the correct size and if any GasGas O rings are correct?  Otherwise I guess I’ll have to source some Vitron O rings at Granger or something (States).

Link to comment
Share on other sites

 

 

Hi Lotus, we never liked the original Ossa O rings, they were too large for the groove outside diameters. We have been using GG O rings for many years which provide a good fit, I can give you the P/Ns tomorrow, it's late evening time here. Bye, Peter B.

Link to comment
Share on other sites

 
8 hours ago, peterb said:

Hi Lotus, we never liked the original Ossa O rings, they were too large for the groove outside diameters. We have been using GG O rings for many years which provide a good fit, I can give you the P/Ns tomorrow, it's late evening time here. Bye, Peter B.

Thanks!

 That would be great info to know- I can pass along for others looking too.

Link to comment
Share on other sites

 
  • 2 months later...
 
6 hours ago, ossabc63 said:

Hello mark you never updated if you got gasgas head o-rings and part #.  Are the 300cc same as 280. Thinking of removing my cylinder head and cleaning the carbon out.  Cheers kim. 

Here are the ones was told about and used.  Worked great

 

1995 GG 250 inner and outer O rings.
Outer old P/N M01619135, now P/N MT27816060 dia 101.30 x 1.78mm
 
Inner P/N M01619215, not sure if it has a new P/N.
Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...