Tarmop Posted October 13, 2020 Report Share Posted October 13, 2020 Hi Guys. I’m getting to the end here I repaired my clutch basket got my kicker back in thank you for all the advice and help ! I notice a bunch of metal shavings from the end of that bolt that I used to lock the Crank and I want to flush the crank case cab or should I just pour in some diesel or parts cleaner , lift up the backend and it’ll flow out of that bolt hole on the front of the case , is that OK ? I’d rather not split the cases but I don’t want any metal getting in those bearings I assume there’s no liquid in the crankcase Other than fuel and two-stroke oil that comes in through the carburetter the only fluids I’m putting in the bike are in the gear case as far as I know. let me know if you have any thoughts on my questions if not I’ll proceed with the flush as best I can thanks as always Tarik Quote Link to comment Share on other sites More sharing options...
Tarmop Posted October 13, 2020 Author Report Share Posted October 13, 2020 All good. I flushed it. 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.