Jump to content

Tarmop

Crank case flush

Recommended Posts

Hi Guys.  I’m getting to the end here I repaired my clutch basket got my kicker back in thank you for all the advice and help !

I notice a bunch of metal shavings from the end of that bolt that I used to lock the Crank
  and I want to flush the crank case 
cab or should I just pour in some diesel or parts cleaner , lift up the backend and it’ll flow out of that bolt hole on the front of the case , is that  OK ?
I’d rather not split the cases but I don’t want any metal getting in those bearings
 I assume there’s no liquid in the crankcase Other than fuel and two-stroke oil that comes in through the carburetter the only fluids I’m putting in the bike are in the gear case as far as I know.
let me know if you have any thoughts on my questions if not I’ll proceed with the flush as best I can thanks as always
Tarik

Share this post


Link to post
Share on other sites
 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...