Jump to content

Tubeless rim supplier ?


andyjohnson_10850
 Share

Recommended Posts

 

 
 
 
 
  • 2 months later...
 
 
 
  • 4 weeks later...

The Morad 36 holes currently made  does not have the correct perimetral dimensions, mine was installed by a professional and had to be replaced by a second hand rim from old manufacturing.

The dimensional difference is only of 7 mm. of the total weel perimeter, enough to loose air when in use, doing an inmersion test was not detectable, so the problem was not easy to find. 

The installation of tubeless rims on our bikes can not be successful if not done by a professional that knows how to correct the misalignment of the spokes, our brake diameter cubes differ from the ones the rim was designed, making recutting for proper alignment needed, not a job easy tot do. 

Regards 

Antonio 

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...